There are a number of important factors to take into account when selecting the best place to install a carbon monoxide detector, and I will take you through the process step by step.
If you're like most people, you tend to 'skim' information on the web - don't do it this time - please read all of this information about where to install carbon monoxide detector carefully; after all when you consider that throughout the developed world Carbon Monoxide is the single largest cause of accidental poisoning, lives are depending on it.
- Places within the Home
- Getting the Height Right
- Places to Avoid
- UK Legal Requirements
- Recommended CO Alarms
Places within the Home
Every Floor of your Home
If your home has several levels, including basements and any attics that are used, then you will need detectors on each level.
The reason for this is that a dangerous build up of CO gas will often be trapped within a single level of your home. Your main living level might be quite safe, but you might go down to the basement only to receive a dangerous dose of Carbon Monoxide because you failed to have a detector there - don't make this mistake.
As is the case with smoke detectors, you want your CO detectors to wake you during the night if something goes wrong. This means that the most important place is near your bedrooms.
I recommend that you have a carbon monoxide detector within 15 feet of each bedroom door, 10 feet is even better if you can afford more detectors. If two bedroom doors are 30 feet apart or less, then place one in the centre of the two. If however they are more than 30 feet apart you will need more than one detector.
Homes with attached Garages
If you have an enclosed garage directly attached to the home, then you should also place a detector within 10 feet of the internal door to your garage. If a motor vehicle is left running in the garage, then a dangerous level of Carbon Monoxide can quickly build up inside your home. You should also place a detector in any room situated directly above your garage.
Getting the Height Right
You must ensure you get your carbon monoxide detector installation height right. While some guides might recommend placing your detectors on the ceiling, I don't agree.
The specific gravity of Carbon Monoxide is 0.9657 (with normal air being 1.0), this means that it will float up towards the ceiling because it is lighter than regular air. However, when a build up of dangerous levels of CO gas is taking place, this is nearly always due to a heat source that is not burning its fuel correctly (motor vehicle exhaust fumes are an exception). This heated air can form a layer near your ceiling which can prevent the Carbon Monoxide from reaching a ceiling detector.
For this reason I strongly suggest that it is best to mount your detectors on the walls at least a couple of feet below the height of the ceiling. If your detector has a digital read-out, then I recommend placing it at about eye level so you can easily read it. Or if you have some other structure, like the exposed beam in this photograph insdide my house which is positioned below the ceiling level, then you can attach your carbon monoxide detectors to it instead.
Places to Avoid
Most importantly you want to avoid false positive readings from your detectors. To ensure your alarm goes off only when needed, you should place your detectors at least 15 feet away from any fossil fuel burning appliances such as:
- Gas powered Kitchen Stove/Oven
- Heating Furnace
Carbon Monoxide Detectors are designed to work within certain tolerances for temperature and humidity. For this reason you must avoid placing your detectors in any locations such as:
- In Direct Sunlight
- Close to Appliances that generate heat
Other places to avoid include:
- Anywhere children can reach
- Open windows or anywhere else there might be a strong draft
- Behind curtains or any structure that might prevent Carbon Monoxide from reaching the sensor
UK Legal Requirements
As of the 1st of October 2015 it became compulsory for landlords to provide working carbon monoxide alarms, in addition to smoke alarms, in rented residential accommodation where:
- All or part of the building is a rented dwelling; and
- There is a solid fuel burning appliance such as a coal or wood burning stove or open fireplace
It's important to note that any fossil fueled appliance such as gas stoves, furnaces, and boilers etc. can also produce dangerous carbon monoxide gas when they malfunction, so I recomend getting detectors when you have these even though UK law doesn't yet require it.